Shelby, Or Not A Shelby?

That is the question. Adam has bought a one-off, hand-built bespoke car. This car is something pretty special because it’s the prototype and the test car for the GT500. This car has 4.6L V8/ Manual five speed transmission with only 11,300 miles on it – most of which were full on track miles for testing the handling, performance and characteristics of the upgraded parts.

The point is that this was not allocated a Shelby CSM number as you would expect for a Shelby car for sale. The reason was quite simple; this car was never intended to be for sale, but things change. Adam expressed his interest in the car a couple of years ago when we visited the Shelby Factory in Las Vegas for our private all access tour. The provenance is in no doubt that this is indeed a rare Shelby. Heres why; this is the ‘primary’ vehicle used for the development of the Drake Muscle Car and Shelby Performance Parts line from 2006-2010. This vehicle was also used in all marketing collateral, install instructions/videos and demonstrated at various car shows. When the vehicle was new, Shelby Autos put on a ‘Shelby GT’ parts kit in the spirit of the partnership between Scott Drake and Shelby Autos to form Shelby Performance Parts, LLC.

The Shelby Upgrades

Ford Racing Springs inc. Shocks and Struts, Ford California Special Mustang front/rear fascia and lower qtr scoops, Baer Braking system (front and rear), Paxton/Vortech ‘SHELBY’ branded Novi 1200 Supercharger with diablosport tuner and vinyl stripe kit.

Under the hood;

The Drake / Shelby Upgrades

Drake adjustable panhard bar, adjustable lower control arms, adjustable upper control arm and upper control arm bracket, Drake/Hoewe 1” tall lower ball joints (rebuildable with screw-in housing), 2007-09 Shelby GT500 factory hood w/Drake 40th anniversary hood vent inserts (lightweight aluminum), Drake billet aluminum high capacity fuel rails, Drake bumpsteer kit, JBA 3” catback exhaust system, Drake front and rear sway bar, Shelby/Drake upper and lower front grilles, Full Kicker vehicle speaker replacement with amp and subwoofer, Shelby center gauge pod with branded autometer gauges, Shelby/Drake billet aluminum pedal covers and dead pedal replacement, Shelby/Drake short throw shifter with knob, Drake GT console lid cover, Drake billet aluminum eBrake handle, Drake billet aluminum climate control knobs, Drake stamped aluminum seat switch covers and map light accents, Drake billet engine caps, Drake billet fuse box cover, Shelby carbon fiber mirror caps, 2007/2008 Shelby/Drake  Shelby GT foglight/brake duct kit, Drake aluminum fuel door and of course some rather nice Carroll Shelby Wheel Company CS40 wheels.

Underside rear;

Underside front;

Bodywork;

Interior;

Wheels & Brakes;

In short, this car is absolutely mint underneath. What Adam intends to do with we are not sure, but when we asked him he simply said “I have an idea for it.” So we will jut have to wait and see. So is this a real Shelby? Without a doubt it is, there is plenty of documentation and photo’s that proves it, along with the fact it has been heavily tested by Shelby & Drake this is perhaps one of the most finely tuned Shelby cars out there by the Legendary Shelby experts themselves, with parts made by Scott Drake specifically for this car, some of which never went into production. Another Shelby Adam has added to his collection.

Oh, it also sounds like it looks – amazing.

For Sale

It’s a known fact that Adam doesn’t actively sell cars. The process works by you taking down the money and making an offer to Adam. Now if he likes what your offer – the car or parts are yours, if he don’t like your offer, he will tell you and you have two options from there; revise your offer or leave it. We now have a unique opportunity to buy a car ‘for sale’ from Adam. The reason is simple, he wants the space, it’s as simple as that.

This is a 1966 Coupe that starts and runs, it’s a 289ci with c4 transmission. This was going to be another project car for Mustang Maniac, but due to work loads and space in the yard now being at a premium, the little lady needs to go, sooner the better in fact.

There are a few bits of surface rust, but nothing out of the ordinary for the age and condition of the car. There is some rust on the front chassis leg that needs repair or replacing nothing that a competent restorer can’t handle of course.

Adam has strict instructions for this car’s sale;

  • No phone calls about it
  • No tyre kickers / time wasters on a day out
  • Emails only to sales@mustangmaniac.co.uk about the car
  • Price is not negotiable, no offers, the price is what it is
  • once you bought it – you take it away.

As Adam says ‘You either want it, or you don’t, the car is worth the money all day long’

The cost is £10,000 

If you want to get into the classic Mustang ownership circle, or just want to flip the car for some cash here is your chance. Not often a proper running v8 Mustang comes on the market for this sort of money. Adam doesn’t have the space or the time to spend on this sale. If he don’t sell it, it will just go to his of yard storage area which is not ideal to retain the condition of the car which would be a shame.

Other News

Adam has some new parts the are coming into us that we have not stocked before, and they may not even be going on the WebShop as far as we know. We will try to grab a few pics for next week for you. 😉 As ever watch this (blog) space.

Got The Hump?

The pace has calmed down a little in the yard we are pleased to say, and we concentrating on the general servicing on the cars we have waiting for us. We have also been working on a pretty unique car in the mean time which has brought with it its own problems for us to sort out, and we have learned from it all in the process. You will have to wait a while until we bring that story in another post soon. Last week we posted a little early about Jacqui’s fully restored ’69, as we predicted the car was completed with no problems a few days later. Here we have a quick snap as the car was picked up and taken home with Roy in the driving seat and Jacqui riding shot-gun. (What – still no sunglasses Roy?) 😂

The interior needed the finishing touches and then another final road test. It was an excuse really to drive this lovely lady. The steering wheel was the last decision and what a great choice it was too.

The door cards were ok, and could have been fitted back on, however there was a small tear on the driver’s side by the handle, a common place to show wear. When you have gone to this much trouble, it’s all down to the details. The carpet on the doors looked ok, until you compare them to the new carpet. The looked positively grey next to the black carpet in fact. So to keep as much originality as possible we transferred as many parts as we could to the new door cards. The result is we have a restored car that looks as though it’s being used and retains the original character of the car.

The centre console was fixed in place and final trim fittings added. Then the final drive to check for rattles and squeaks but all was good and Jacqui got the call. “She’s all done and ready for you.”

Enjoy the car, she’s a beauty.

Customer Cars

There were so many options available on the early Mustang when you ordered one, that all the combinations reportedly “ran into the millions”. A fairly expensive option at the time was the centre console. This was either full all the way up under the dash or had the even more expensive factory air-con option under the dash and the alternative console fitted under that with different fittings. To get genuine original parts are rare, fragile and can be silly expensive unless you “go repro”! The long transmission tunnel can be a large expanse of carpet, so if you want the best of both worlds there is an answer, Hump Hugger. The Hump Hugger fits all cars from ’64 to ’73 and comes in a wide range of colours to match your interior. The best part? It’s held in place by velcro that won’t let go when you drive around a corner, so there’s no drilling or extra holes to be made, which means it can be removed at any time. We have some pics of the unit in place courtesy of our friend Lance who treated himself to one.

What more could you want? A compartment to hold your old 8 track cassettes and a couple of cup holders for your caffeine fix. These are special order items from us, click here for details, but with our regular deliveries it won’t take long to get to us. Copy the link below to your browser for this colour:

https://mustangmaniac.co.uk/part/59/7316/64-73_humphugger_console_l_blue

As  Father’s day is on the 17th June next weekend. We have lots of stock, from a few washers all the way to a complete body shell all online from our WebShop, no need to call us. If in doubt what to spoil that special man in your life with; Mustang Maniac gift vouchers are the way to go and you just can’t go wrong.

Knock Knock…

We start this week with a Park & Pic of a unique car a genuine Shelby GT350R, a race car owned by our friend and customer Larry Tucker. This is not your usual add a few stickers effort like so many do and think that it adds 100bhp or something. This is a fully stripped out Shelby FIA inspected race car and goes just like it looks!

We wish every success to Larry with his little trips around the track, just bring her back in one piece with a few added bits of silverware maybe. 😀

Epic Engine Fail

It can be said that the Ford V8s are a tough cookies and they are pretty bullet proof as long as they are maintained well. On a rare occasion we get an engine in that has a major problem. A customer had bought his car into us saying that there was a “knocking” noise from the engine. The 302ci engine was running, well sort of, but it didn’t sound too good that’s for sure. Yogi was eager to get on with the diagnosis and he was pretty sure what it was, but to what degree? His first job was to have look at the oil which was a messy mixture that resembled gravy more than oil; a bad sign. The “oil” was drained and a total of three gallons of gravy came out. Slightly more than the normal oil quota and was left to dry out. The engine was taken out the car and put onto one of our stands for a close up look. It was decided to video the removal of the oil sump pan as there was a rattle and a tinkling of falling metal when the engine was turned upside down; now a very bad sign.

You can see a smashed piston and connecting rod fall out in the video. Something as catastrophic as this would entail much more damage than a new piston. Inspection showed that the block had a hole punched through it and was now a nothin’ more than scrap. The picture here show the hole in the block:

Damage to a spark plug where a piston has slammed into it.

Some of the shrapnel that was pulled from the depths of the engine.

There was nothing that can be done except for Yogi reading the belated mechanics “last rites” before it goes to the great scrap yard in the sky.

R.I.P 302ci.

Customer Cars:

The black convertible is now back together again and ready for her last road test before we hand her back. She looks a real head turner again and now leak free from the replacement cowl.

The new carpet was laid and our ever popular LED dash bulb upgrades fitted.

Cast your vote time:

Our friend Spence (the other half of the Bully Brothers with Yogi), bought his car “The Grinch” in for a little once over and a treat for his lady. The trouble is we were undecided on look and Adam is asking our readers what they think; Black or Alloy rims?

Please vote it will make Adam happy and it only takes two clicks. 🙂

A Two Week Reminder

In two weeks time is our local Mustang Maniac car show at Enfield, which is always popular. Come and visit us and see some of best Mustangs in the country on our very own stand.

Four Ready To Go

The week we were back to mechanics pretty much full-time and only managed a little bit of work on the restoration projects we have on the go. These cars were all lined up waiting for their owners to collect them and we managed to grab a few nice pics before they were taken away.

Park & Pic Special

Ember Glow ’66 Coupe is a genuine GT option and a rare colour option. At the time it was not a popular colour, but now days is quite well sought after as a lot of the interiors were also two-tone.  This car was in for some cold start issues and a new battery.

The ’68 red convertible was in for some of our new Magnum 500 Alloy wheels. This particular style is popular because they are light, not as much upkeep as the chrome, still have the same look but just a little different from the rest. The new wheels warranted a full Geo setup and tune to get the best from the wheels and improve the handling. The raised white letter tyres matches the soft top fabric and our red centres matches the paint.

The ’67 v8 black convertible with deluxe interior was in for a little Mustang Maniac once over and then of for an MOT. This particular car is a real nice example of an untouched original car. 

The White ’66 Coupe was in for a little more work. The heads were to be replaced with our stock reconditioned heads. The pulleys were also cleaned and painted for a new fresh look.

The new ones were fitted after the paint had dried, then the new coated headers completed the clean engine look.

The rocker covers were replaced and the carb with a re-tune and timing just to be sure.

Once the engine was running again we then set about a little more cosmetic and suspension upgrades. The curved chrome Mote Carlo bar was a new edition to the engine bay, and an upgraded export brace to replace the standard shock tower braces. These changes not only look good but also make a big difference to the front end handling.

Another Testimonial:

One of our new customers picked up their car and took her home. We later received an email with lovely comment.

“First of all thank you for your hospitality and the rubber aerial seal and the keyring. The drive home was an absolute pleasure. I enjoyed driving the car before, now I LOVE IT. You and Alan definitely worked your magic on the Stang. You have transformed it from a good car to a great car.

I will be your life long loyal customer.”

Little emails like that makes us proud here at Mustang Maniac to know that the customer is happy with their car, and that they will get to enjoy it even more now. 🙂

Other News:

The 2018 model already being the most customizable Mustang ever, it also breaks new ground in personalization.

Ford is launching a new Personalize Your Pony experience on Facebook that allows Mustang fans to create their own iteration of the iconic emblem. They can then order clothing, mugs, phone cases and decals with their unique pony logo creation, and share the image with friends on social media channels. Enthusiasts can access a series of Mustang style packs – including variants from Shelby, Roush, Bullitt* and RTR Vehicles – and colors.

Ford will plaster the most popular pony designs across billboards in major North American cities this spring. If that is not bragging rights we don’t know what is!

Corey Holter, Ford car group marketing manager, said driving a Mustang has always been about standing apart from the crowd. “This is a chance for Mustang fans everywhere to make their very own personalized pony, then potentially have it shared where millions will be able to see it,” he said. Some fans will even be able to show off their creation with a customized grille badge for their own 2015 model year and newer Mustang.

What are you waiting for? Get over to Facebook and get busy.

Classic Cars Excel London 2018

It’s a known fact that Adam doesn’t do big car shows, “been there, done that and got the trophies as Adam would say, but on the odd occasion he will. Last weekend was one of those shows, the Classic Car Show at the London Excel Centre. This show is aimed at people wanting to buy classic cars rather than the trade style shows on how to restore them. The cars were all glistening and tip-top looking, in fact some were better than when they came out the factory. Adam took his much-loved KR to the show and was along side a few other great cars at the Mustang Owners Club of GB all weekend.

There was the usual interest in the car and somebody even argued that Carroll Shelby signed the name wrong on the glove box. It was explained that the signature was Cleo’s, unfortunately the little knowledge the gentleman had didn’t extend to Carroll’s wife!

There was a nice collection of Classic and some rare UK Fords:

Some iconic Classic British cars.

There was of course the Classic USA Fords; including a genuine GT350 up for sale with no price tag on show!

There was some Classic Super & Hyper cars, that already have the Classic status.

Check out the price tag for this Ferrari 250, got any spare change?

A section that was created for the show was called the “Getaway Cars” which was to show the most popular and well-known vehicles. We use the term vehicles because the well trusted “Ford Transit” was used in many a “job” at the time along with the legendary Lotus Cortina.

Speaking of Transits there was a specialised coachworks for a beautiful example.

The unusual cars and items for sale were not forgotten.

Perhaps the most iconic automobile that brought affordable travel independance to the masses was the Ford “Model T” which was also named the most influential car of the 20th Century. This car was also the first to be built on the fully moving production lines, changing the face of manufacturing as we know it. By 1918 over HALF the cars in the USA were Model Ts.

The last day Sunday 18th February 2018

During the show the guest of Honour was the ever popular 1992 Formula 1 world Champion & Indy Car World Champion 1993; Nigel (Red 5) Mansell who appeared on the Sunday to receive an achievement award. He drove a Formula 1 car indoors which made plenty of noise should we say, especially when doing donuts and lighting up the rear tyres. He signed autographs and done a couple of question and answer sessions which proved to be very popular and very informative.

His much loved race cars were on display which had a constant wall of people around them.

There was a stand that catered for the rich children with miniature versions of classic cars with petrol engines, maybe not quite the growling 427ci monsters under the hood, but a more modest single cylinder version.

Customers Cars:

Yogi and Paul got to work on the Classic Mustang rust spot; the lower cowl sections. On cars after ’66 they were a little easier to get to, but still need a lot of skill to replace as this also forms a structural part of the car. The thin and rusted through lower section can clearly be seen.

With the cowl removed the inner workings of the car can be seen. Welding the cowl back needs considerable care in order to not scorch or damage the rest of the car under the cowl.

We could bring more about this week, but we think the blog post is full enough, for now at least. Did anybody else go to the show and what were your thoughts?

Bubbling Away

For the last couple of posts we have asked you to send us some pictures of your cars so we can post them for you on our little ol’ blog. We’re pleased to say that you have taken us up on our offer, so please keep them coming. We had an email from Alan Bullock. He sent us a few lines with his pictures:

“I thought I would just tell you that my 1968 302 V8 (4 barrel carburetor) Red RHD Mustang Convertible Is 50 years old today and still looks wonderful. Thank you for you help in the past.”

In fact we like to think that the people who entrust their treasured cars to us have become more than just customers, they’ve also become our friends.

Customers Cars:

At Mustang Maniac we are never afraid to show the quality of our work and how we go about it all. Obviously we don’t show every single one of our little secrets, but we do show a lot of the processes. That way you know exactly what you are paying for. Last week we posted a repair of some rear quarter panels that had started to rust from the inside out. We received an email on what that would look like. We took some photo’s before hand of the metal worm in progress. A little bubble under the paint will often reveal a lot more than you expect.

Golden Convertible.

We showed a number of months ago the work starting on a restoration on a gold convertible, that work has started up again and we are working on the inside now.

Car Shows:

We have a car at “The London Classic Car Show” in the Excel Centre. Adam loaned a car to the Mustang Owners Club stand, his much-loved Shelby KR. This is a picture of the car before the crowds all started to arrive on the Thursday this week. We will bring you some more pictures of the show. Pop along to Mustang Owners Club of GB to say “Hi” and that the Mustang Maniac blog sent you along. The guys will appreciate it.

A Chilly Work Of Art:

We had this link sent to us and we thought that we would share it with you, especially if the weather is snowing where you are:

A Ford employee and Dearborn resident Jacob DiMaria’s creative snow sculpture isn’t your average snowman. 

 His creation – a 1965 Ford Mustang – took about 10 hours to construct Sunday and Monday after a big snowstorm in Metro Detroit. The sculpture is drawing lots of attention from his neighborhood, as well as from the Detroit Free Press and Channel 4 News. Reporters came out to his house to see the creation for themselves, and interview DiMaria and his wife Lizzie.

DiMaria said he and his siblings often made snow creations when they were kids and never really grew out of it. He built a little snow dog a few weeks ago on his back deck, but it was when his brother made a bear that he felt he had to step up his work. And so he turned to the Mustang. “I’ve always liked the ‘65 Mustang, plus the body lines were relatively easy to sculpt in snow,” he said. DiMaria, a technologist who has worked for Ford since July 2014, said his co-workers have gotten in on the fun, too, making many jokes. If it’s any reassurance to the design employees: DiMaria acknowledged that the car’s proportions are a little off – but it’s close. “It’s not perfect but it’s what it is,” he told the Free Press.

Mustang Manaic thinks that it’s pretty amazing, now who was it that said you can’t have fun in the snow?

Not us!

Keeping In Trim

Quite often we get emails sending us pics of cars they are thinking of buying and asking if it’s worth the money and should they buy it. There are lots of issues around this sort of thing, we virtually always decline to answer such questions. This is nothing personal of course, but we can’t see the car up close and inspect the things we need to before we pass any comments. If the car turns out to be a bag of rust, we will no doubt will get  the blame. Of course we could offer a valuation service to go and look at a car and advise, provided that all expenses and time are paid. Would people be willing to pay for the service? Let us know. Within the latest batch of emails this week we had a great email and on Facebook from somebody who still runs a classic Mustang as their daily driver. We think this is pretty cool and gave us an idea. Send us your pics of your car that you drive around in on a daily basis, then we can see just how many are on the road everyday out there. Is this a rare case or are there others out there? We will even put your pic on our blog to show the world on our new section; Daily Driver. This may be a one-off, but we hope not.

Daily Driver:

This was sent to us by Michael Joachim of his “Daily Driver”.  Now that is just cool.

Customers Cars:

We are getting on with Roy’s car and starting to put her back together. As soon as the glass goes back in the project looks half way there and a significant milestone has been reached. Once the windscreen was fitted and sealed in place the first of the nice trim parts were fitted in place.

The upper cowl section was refitted and the hood so that the gaps could then be set. Then the hood was taken of again ready for the heart of the car to go in. The engine was previously stripped, rebuilt and painted prior to fitting. Yogi and Paul a great team working together know how each other works and thinks, so this is poetry in motion to see.

The carb was fitted and the correct rocker swapped over leaving only the air pan to be fitted and checked for fit.

The carb needs to be tuned and setup, but not just yet though. The HT leads and distributer are fitted along with the basic wires from the new wiring loom.

Things seem to move very quickly with the large parts being fitted and then it all slows down again for the more detailed parts. The FMX gearbox was treated to a service and the oil was crisp and new as the day it was put in, which is always a good sign.

From there the gearbox was given a coat of red oxide then a coat of the black finish.

The gearbox was fitted to the engine and bolted in place.

The inside of the car was treated to some new carpets and padding.

 

Other News:

We have been asked about how the puppies are doing. We can say that the mum Shelby is now back on guard duty in the yard and the pups are growing up, fast. Warning: Cute puppy pics!

Aria Loves her dad!

They now have names; the white one is now called Cleo and the other rascal is called Aria.

These are the latest taken a couple of days ago and not quite so small.

Next week we will be bringing you some updates on the “Onion” and how that is getting on. Remember to send us pics of your Daily Driver.