Rollin’ On

We would like to thank our followers for some rather amusing response emails to the photos that were taken of Adam at the SEMA show. Some we couldn’t possibly put up on a family blog! We can answer a question that was answered a couple of times. Was that all the photos of other cars? Honestly, Yes that was all the photo’s Adam took of non Mustang Cars! While we are on the subject of SEMA 2017 we were sent this press release from Ford. (Thanks Gary.)

“DEARBORN, Mich., – Ford Focus and Ford F-Series are now back-to-back-to-back winners of Hottest Hatch and Hottest Truck awards from the Specialty Equipment Market Association. Ford’s domination of the show continues, as it collects these coveted awards at a greater pace than any other automaker. Ford has won 15 out of the 33 Hottest Vehicle awards presented by SEMA since 2010. “The aftermarket industry’s ongoing elevation of our vehicles feels great,” said Dave Pericak, global director, Ford Performance. “We are beyond proud to have two back-to-back-to-back winners in our Focus and F-Series.” With its hot ST and RS performance trim levels, Focus continues to win over the aftermarket. Two years ago, it took home the final Sport Compact award. 2017 now marks two years running for Focus winning Hottest Hatch. F-Series, the ultimate Swiss army knife of the aftermarket, is a proven favorite for customization into everything from tarmac-shredding drag racers to off-road monsters. America’s best-selling vehicle has been named Hottest Truck seven out of eight times in the award’s history.

“Ford has a long history of support and partnership with the aftermarket community, bringing increased options and products for consumers,” said Chris Kersting, SEMA president and CEO. “F-Series and Focus are just two of the most recent examples of the great vehicles Ford offers for personalization.” With more than 50 vehicles on display, including a large collection of custom builds at its stand, Ford’s presence at SEMA remains the largest of any automaker. This is the seventh year for the Ford Out Front performance demonstration track, a lead attraction of the 2017 show.”

Quite an impressive record we must say. Congratulations to Ford.

Customers Cars:

The “Blue Racing Coupe” is now at a point where she is ready for road tests. The engine was wired up and plumbed in over the week.

With the engine all fired up and some base line setups made we could put the car panels back together again. The rear axle was replaced with a reconditioned as good as new 9″ version to do away with the welded up rear end that made the car a real handful to drive on normal roads as a result.

Not quite the race car she was turned into, but much more enjoyable to drive and will still be able to hold her own if somebody wants to try and race her.

’69 Mach1

Jacqui’s car has some temporary wheels on it now and can be rolled around the workshops as we need to now. This is always a big step as all the main running and steering gear has been fitted. The car’s paint job looks pretty cool out in the evening sun.

Andrew Hedley has done some nice charity work with is ’65 Coupe. He brought his car to us to sort out its “saggy bottom.” We have the before and after pictures his. New rear springs and shocks makes a massive difference to the car’s handling that’s for sure, as well as giving the car its aesthetically pleasing correct stance. Must be all that wine Andrew keep filling the trunk up with? 😉

A subtle difference, but what a difference! 

We have been asked about our Dual LED Bulbs front the front of the early Mustangs. We have just uploaded this video to our YouTube Channel to show how they work.

If you want to order them here is the link to our WebShop or click here.   https://mustangmaniac.co.uk/part/36/8024/led_dual_bulb

We haven’t forgotten about the exclusive we have for you. We are just making sure those involved are happy for us to post it up for you.

Watch this space! 🙂

Along For The Ride

Starting on Tuesday until the Friday next week is the annual SEMA 2017 show which Adam attends each year. However Adam tells us this is a chore and “Somebody has got to do it” suggesting that he doesn’t really want to go to fantastic city for the night life or being at America during the wonderful Halloween time. He also says that he has to go to a motor show and look around some pretty awesome and unique cars, innovative new parts and be distracted by some very pretty ladies promoting various companies products. After a stressful day he will be in need of some serious beers, not that we are jealous or anything of course. (Much). Seriously though Adam will not be back into the UK until the 14th November, he will have limited access to emails so please bear with us during this time.

Customer Cars:

We have the 69 Mach1 being worked on this week with the brakes and steering being fitted. The worthwhile upgrade for the cars is always the Borgeson power steering, and this little lady was getting just that along with a nice new shiny dual master cylinder and brake booster.

A new set of disc brakes to the front, no corners are cut here and even the bolts are sprayed silver to protect from rust and also for a little show.

The front suspension was replaced with nice new control arms, shocks and springs.

The brake pedal installed and connected up to the booster, followed by the top quality signature work from Yogi, his bespoke brake lines that are unmistakable and unique to each car.

All of a sudden the painted shell starts to look like a car again, from the outside just for now.

Convertible: 

Another suspension upgrade on a convertible. The suspension over the years starts to degrade at such a slow rate that you don’t realise until one day you think to yourself there is something wrong here. So another replacement shocks, springs front and rear, control arms and updated sway bar. The next time the owners gets in this car it will feel totally different. First the old stuff.

Then the new parts fitted.

The great debate. (Yes – it still rages on)

It seems the next announcement from the lunatic asylum that is the DVLA is that while cars over 40 years are no longer required an MOT – any classic car (which they call historic cars) over 40 years old, but has had its power-to-weight ratio increased by more than 15% will require MOTing and then be assigned a Q plate, which will stay with the car for life and can’t be removed. The complete madness in a few examples:

Scenario 1: changed the carb from a smokey old relic to a modern more fuel-efficient fuel injection system….MOT/Q

Scenario 2: change the stock cast iron heads and manifold to a more efficient aluminium set….bingo you have a double whammy as not only have you increased the power you have also reduced the weight – seriously altering the power-to-weight ratio…..welcome back to MOT and Q!

Scenario 3: 1930s Ford fitted with a 350/350…..forget it!

It now seems since this latest “idea” was made by people in the DVLA that know about these things, (who obviously have an IQ the same as the number of wheels on their own cars), have now relented and will will not pursue the ‘power to weight ratio increase’ exclusion in the MOT exemption process. While there might be some kit cars and some heavily modified vehicles that will still require an MOT, all other classics will not. This means that Mustangs that have been “improved” will still classify as historic. About time that somebody took a long look at what they are trying to achieve. Virtually nobody wanted this to change, so “If it ain’t broke – don’t fix it!”

Ken Block is at it again with Gymkhana 10 Trailer. 

We have been sent this link to a trailer on YouTube (thanks Gary), for the latest instalment of the fire-breathing AWD Mustang now with 1200bhp and twin turbos. We were lucky enough to see the car last year at SEMA. We can’t wait for this next instalment!

We hope to bring you some pictures from SEMA again this year so watch this space.

Have a safe trip and not to stressful “working” break Adam.

Under Cover

We’re back to posting on our normal Sunday slot again, hope you didn’t miss us too much last week. We thought we get straight into today with updates on the customers cars and where we are with those.

Customers Cars:

Jacqui’s ’69

With the car back from paint work has begun on getting the car back together again.

Work has started on the sound proofing on the inside, a good upgrade, not cheap and nobody will ever get to see it as it’s covered up under the carpet!

With the parts being taken home by Roy for some “homework” they are then returned restored ready to fit back on the car, providing Adam and Yogi are happy with them first of course.

We tend to use our static dust cover sheets for short-term storage that clings to the paintwork when she is covered, lightweight and easy to remove without damage to the paint. Ideal solution ready for the next working session.

We had a little play with the colour filters, which changes the look and feel – any particular one you like best, the original, black and white or the moody low light version?

BRC (Blue Racing Coupe)

The engine on this little lady was given a check over and the first lick of paint ready to go back into the car.

The engine was put back together with the re-coated headers, and new rocker valve covers.

428 Super Cobra Jet

We didn’t take long to discover where the leak was under the dash. We could smell the antifreeze in the car so that can only point to on thing, the heater matrix. We removed the matrix and confirmed it was the cause of the leak. With the part replaced and fluids topped back up again it was time for a small service and check up underside. The oil and filter were changed as part of the standard service. With all the fluids where they now should be, it was time for a tune up of the carb to make her run smoother and more responsive. Job Done!

Work Shop News:

Adam has been on spending spree, (again). This time it was an expensive upgrade to the workshops as we are getting more and more requests to geometry alignment to the suspensions on these classic Mustangs. We use our own tried and tested specifications which are a slight tweak from the recommended book setups, but don’t ask the guys for the details because they won’t reveal it! Feedback from our customers is very positive after the fine tuning suspension set ups, word of mouth has got around that this really can make a difference to the car’s overall handling. There is still a Geo unit in Yogi’s work shop and now Adam has the very latest laser technology from Snap-On in his workshop. The logical reasoning behind the purchase is that it’s not always possible to Geo the cars when one is on the ramp unable to be moved, because it’s in bits – for now. Adam will also use it for the other vehicles in his LAR and SMR fleet vehicles too.

Book yourself into the workshop for a geometry suspension check up, it will also save your tyres wearing unevenly, unless you do lots of accidental burn-outs that is, then we can’t help you there! 😉