Wheels & Deals

We have a fairly large update this week with lots of work going on and new parts in stock and an exciting new distribution deal for Mustang Maniac. More requests for the pups pics this week as well, so lets start with the cars, parts and pups that aren’t so much puppies anymore if that sort of makes sense.

Customers Cars:

Last week we showed you the MSD Ignition upgrade on a car, now we have done more to it. As the car is going to be drag raced this car has a rather unusual engine in it.

stroker

We were asked by the owner to fix a few issues and upgrade a lot more in the mean time, which of course we were happy to do. The requirement was to have a “Line Lock” installed which allows the front wheels to be locked by the brakes and the rears left free. Why? For that all important burn out to warm the tyres up. A fairly complex set up which requires a set sequence of buttons and pedals to engage for safety reasons. The brake lines have to be re-routed first to an electronic valve.

The best part is it that the switches to engage the “Line Lock” looks pretty cool on the console with the jet fighter control switches.

To complete the set up the important shift indicator was mounted on the steering column.

linelock7

Obviously not everybody will like this look, but we think it suits this car it certainly looks ready for Santa Pod drag strip now.

Belgium Convertible:

This convertible was last mentioned around October time last year where the inner side of the rear quarters were sprayed and ready for the paint job. The car was taken to paint and left in the very capable hands of “Paul the Paint”  and the slow process of bare metal strip down started. The result was not off to a good start and has taken longer to sort out than was planned for. The front fenders had been patched and the rust was eating away what was behind them and had to be cut out and made good. All of which takes time.

The rest of the car was stripped back to find quite a lot of filler, that is not unusual by any means, but again, it all takes time to remove and investigate.

With the car down to bare metal, the process of adding filler and aligning up the panels again can begin.

convert52

The front rust damaged fenders were patched, filled and rubber down.

The trunk lid was showing signs of the dreaded rust worm and need to be sorted out.

The braised areas was rubbed down and all in place where it should be, not just welded.

With the hard work completed the expertise of the paint can begin. The etch primer was applied, then the grey primer.

That’s the story so far, hopefully the colour can on then we can get this lady back to finish it off.

Dealer News:

Very exciting news now; Mustang Maniac has been appointed as supplier of Spax Shock Absorbers in the UK.

spax

We shall be stocking a range of their products which will fit the Classic Mustangs and other makes and models too. No sooner had we had a set of Gas adjustable shocks delivered in, they were fitted. We mentioned above the drag car, well they went on that. A very nice pair of Krypton Gas adjustables.

To complement the shocks a pair of our new traction bars was added, not just bolted on like they advise, oh no. These brackets were welded to the rear chassis legs to take the torque delivered through the 9″ rear diff and axle. Yogi said enjoyed this part as he drag races his Mach1 as well.

Wheels:

Mustang Maniac & Scott Drake has secured a very unique deal to fabricate some BESPOKE wheels just for us, which will fit the Ford UK spec four lug wheels. We will be bringing you more news and pictures when they are on their way. Please email if you are interested in the purchase of the wheels and we will add you to our lists and advise when they are here.

Parts:

We have been asked for our connoisseur engine tuners who want the best of the best for their cars. We now are stocking some wooden carb to engine spacers that will dissipate the heat much better, these are definitely not your Enos range. We are also stocking a wider selection of spacer styles and thickness’. There are even now ARP styled stud bolts to fit now as well to give that finishing touch.

We are now also stocking some top quality gaskets now, metal framed in sandwich of sealer material. Again more top quality parts that we are selling more of now.

carbpart6 We of course now have a larger selection of throttle control springs too, not only do they look great, they also add the extra spring for security and peace of mind just in case one fails.

There are so many hood scoops out there, after market styles, Shelby style, made from fibre glass or metal. Well Mustang Maniac now has a stock of some stamped steel GT350 hood scoop. These are heavy gauge steel and not the cheaper fibre glass versions. Again we had a request for a metal one so we ordered in a few more while we were at it. They are now in stock on our WebShop, click here for the quick link.

Models

Mustang Maniac wasn’t to be left out of this model thing and hs gone eco-friendly and got a working electric-powered one.

This toy has had a hard life by the looks of it, but it still works. The battery compartment takes a couple of batteries and the single light bulb will power the headlights and the tail lights. The steering is just angled to where you want it to go, and off it goes.

The only down side is that it has lost its hood. We have not seen another like it and would like to know more if you can help out, let us know.

Important Signature:

There are some autographs you want to collect, but Mustang Maniac has been given a signature by the late Henry Ford II. Henry Ford II was born 4th September 1917 and died 29th September 1987. He was sometimes known as “HF2” or “Hank the Deuce”. Henry II was the oldest son of Edsel Ford and oldest grandson of Henry Ford. He was president of the Ford Motor Company from 1945 to 1960, chairman and chief executive officer (CEO) from 1960 to 1979, and chairman for several months thereafter. Notably, under the leadership of Henry Ford II, Ford Motor Company became a publicly traded corporation in 1956. From 1943 to 1950, he also served as president of the Ford Foundation.

Henry-FordII

The significance of the envelope was that his was the first time Ford was to make a World Car. This item will now be part of our very much prized possessions hanging in our offices. A huge “Thank You” to our very kind friend and customer who donated this to us.

Pups:

Last, but not least the pups, not too much to say here as the pics speak for themselves. They are getting bigger by the day and are 11 weeks old now. The pink Collar is Daisy and the other two in the blue ones are PJ and Enos.

They were in the offices yesterday and cause mayhem as usual, but they  all got their cuddles when we could catch them. Enos was on Adam and even got on the lap of another customer. He came in for parts and almost went home with a puppy!

Mum and pups all doing well.

4 thoughts on “Wheels & Deals

  1. I have line lock on my car and would love to use. Now to muster up the courage to take it to a track and register it. (This is the only way that won’t void my warranty). PS the pups are real cuties!

    Like

    • Good shout to use the line lock properly and keep the warranty in place. As for the pups we get requests in the office and via email. We don’t mind as we love them to bits, perhaps we should rename our blog the “puppy posts” or something. ☺

      Liked by 1 person

Please Leave us a comment

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s